Aldi Workzone 3.6V Screwdriver Review

-
If you're familiar with the German-owned supermarket chain Aldi, you'll know that every week they offer Special Buys, and quite often these things are absolute bargains. At £12.99, this little cordless screwdriver definitely falls into the 'bargain' category. I haven't used it in anger yet, but I have tested it on pine and oak, and it performs extremely well. If you do a lot of screwing (stop sniggering at the back), this is the perfect thing to use alongside a cordless drill - the time saved in changing bits totally justifies the cost of this chunky little tool. Highly recommended.

Comments

  1. __philippe5 March 2019 at 08:42

    Question about charging LEDs indicators:

    Right after a full charge, the RED-YELLOW-GREEN LEDs are each lit at maximum brightness.

    When using the tool right after a charge, however, the LED's brightness is as follows:
    - RED: medium
    - YELLOW: medium:
    - GREEN: very faint
    Is this the expected status for the "in-use" charge LEDs ?

    ReplyDelete
  2. Advance Tech Services (P) Ltd.23 October 2019 at 12:33

    Awesome! I love this fruitful content. Thanks for your time
    electric screwdriver

    ReplyDelete

Post a Comment

Popular posts from this blog

MacAllister Electric Planer Review

-
Image
I damaged my old electric planer when trying to change the blades. I would have read the manual, but I'd lost it. A quick trawl of the interwebz showed cheap and tacky planers (like my old one) at about £25-£30, a few around £50 and big name brands from £150 and up. I'm not one for buying professional-quality stuff, and I don't have a favoured brand that I would always buy. And let's face it, even well-known brands can produce the occasional lemon. One planer that caught my eye was the MacAllister one - MSHP900 3MM PLANER 230-240V. Like all of their tools, it has a pleasing light grey and black colour scheme - a bit like a Star Wars Storm Trooper - with sky blue highlights. It promised to be able to cut up to 3mm at a time, unlike most of the others which can only do 2mm. But I think what sold it to me, as a left-hander, was the ability to fit the dust bag on either the left- or right-hand side. It was £50 from Screwfix. It was a new product, so there were no...
Read more

Evolution R255+ Sliding Mitre Saw | Unboxing, Assembly, First Use, Review

-
Image
Evolution R255+ Sliding Mitre Saw Having bought and reviewed the  Evolution Rage 3S  about a year ago, it's now time to have a look at its big brother, the Evolution R255+ Sliding Mitre Saw. Full disclosure: Evolution Power Tools sent me this to review, and I have received no payment. I've seen the basic model on sale for about £150-£170. The Plus model, which I reviewed, is about £20-£30 more. The first thing you notice as you open the box and decant the contents, is its size. It's ENORMOUS! There's a single-sheet assembly diagram, accompanied by a small booklet of detailed instructions. Both these items use line drawings rather than photographs, and they are extremely clear. Assembly is quite straightforward, but I did make the error of inserting the slide rail unit upside down and it wasn't until I'd fitted the machine head and tried to fit the slide rail cover that I realised. So I had to do a bit of disassembly. Get the handle the right way up ...
Read more

I'm Back!

-
Image
 I'm back - well, actually, I never went away but you could be forgiven for thinking I had. My last entry on this blog was almost 2 years ago and basically it was telling you that the YouTube channel was becoming a vlog - a weekly summary of what I'd been up to and things that had caught my eye in the previous week. I did that for about a year but never produced anything on the blog to go along with it - the videos alone were taking far too long to edit and there was no time or inclination left for me to produce write-ups too. So I stopped the vlog in May 2022 - it wasn't really a conscious decision, it just kind of happened. But lately I've been thinking about rebooting it, mainly because I've spent the last month or two learning Blender and I wanted to create a lasting record of the things I've learnt. If you don't know what Blender is, it's a brilliant piece of Open Source software for creating 3D models and animations. It does CGI, basically. It isn...
Read more